6-Cubic-Meter Compression Garbage Truck Garbage Transfer Vehicle Garbage Collection Vehicle

• Customization: Available
• After-sales Service: 12 Months
• Warranty: 12 Months
• Model NO.: 6-cubic-meter Compression Garbage Truck
• Type: Rear Loader
• Certification: ISO9000, CCC
• Volume: 6001-10000L
• Emission Standard: Euro 6
• Transmission Type: Manual
• Payload: 6t
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: Chengli
• Models: Medium
• Usage: Dump, Swing Arm Type, Sealed, Hang Barrel Type, Arm Type, Compression Type, Eat Hutch Type
• Condition: New
• Truck: Squeezing Garbage Truck
• Vehicle: Item Recycling Vehicle
• Specification: 6650× 2050× 2750mm
• Trademark: Chengliwei
• Origin: China
• HS Code: 8704223000

Product Description

6-cubic-meter compression garbage truck

Factory of Chengli Special Automobile Co., Ltd. has an overall beautiful appearance, high cost performance, and is safe, reliable and easy to operate. This series of garbage trucks is a mature product of our company. The upper part of the vehicle is composed of a sealed garbage bin, a filling device, a pushing shovel, a hydraulic transmission system and an electrical control system. The whole vehicle is fully enclosed and adopts the technology of integration of electricity, hydraulics and pneumatics. With the help of the automatic control system combining machinery, electricity and hydraulics, and through special devices such as the garbage bin, the filling device and the pushing shovel, it can realize the functions of dumping garbage, crushing or flattening it, forcefully loading it, squeezing the garbage into the carriage, compacting it and unloading it. All the sewage generated during the compression process will flow into the sewage tank, which solves the problem of secondary pollution during the garbage transportation process.

Announcement Parameters

Product Name	Compactor garbage truck	Product trademark	Cheng Liwei Brand
Total mass (Kg)	7300	Tank volume (m³)	6 cubic units
Rated Load Capacity (Kg)	1870	External dimensions (mm)	6650×2050×2750
(Kg)Prepared quality (Kg)	5300	Truck bed dimensions (mm)	××
Number of axes	2	Wheelbase (mm)	3360
Chassis model number	QL1070BUHACY	Chassis name	Truck chassis (category two)
External dimensions (mm)	5900×1880×2200	Number of tires	6
Fuel type	Diesel	Tire Specifications	7.00R16
Emission Standards	GB3847-2005, GB17691-2018 National Emission Standard VI
Engine model number	Engine manufacturing enterprises	Displacement (ml)	Power (Kw)
YCY24140-60	Isuzu (China) Engine Co., Ltd.	2360	103

Upper garment technical specifications

Effective volume of the enclosure	6³
Enclosure shape	Arc
Enclosure material	Low alloy plate edge 4mm bottom 4mm
Feeder effective volume	≥0.8m³
Loading cycle time per instance	≤25s
Shifting the garbage time.	≤45s
Control method	Automatic, manual
Maximum pressure of the hydraulic system	18MPa
Multi-way directional control valve	Yangzhou Zhongmei / Hunan Honghui
Hydraulic oil pump	Hefei Wan Ye
Hydraulic cylinder	Holite/Powerly
Power take-off	Jiashan Brand
YouTube	Guangzhou Tianhe / Global Pass
Control system	CAN-BUS Bus Control/PLC Siemens
Lifting cylinder balance valve	Yangzhou Zhongmei / Cortsen
Engine Power Control	Fully automatic control
Flipping mechanism	Standard configuration with 2 units of 240L flip mechanism

Main Performance and Features
1. Electric and hydraulic combined control. The vehicle's control system comprehensively utilizes the advantages of electric and hydraulic control, controlling the hydraulic valve group through the electric control system, which improves the reliability and efficiency of use.
2. Automatic control of engine power output. Engine power output control, also known as throttle control, can be fully automatically controlled through the electrical system, meeting the power requirements during the garbage compaction cycle and push-off discharge. In other conditions, the engine automatically remains at idle, reducing power loss and the rate of failures, lowering fuel consumption, and improving economic efficiency of use.
3. Frame structure. The garbage bin is made of reinforced beams and steel plates welded into a sturdy frame structure, with the sides and top being curved surfaces, aesthetically pleasing, lightweight, and well-received in terms of stress; the pusher is composed of a rectangular tube frame and folded panels, not only structurally lightweight but also allowing for even distribution of garbage, clean and thorough discharge; the filler is mainly composed of the filler shell, sliding plate, and scraper components, with each component using beams or box-type structures that are well-received in terms of stress, making the structure sturdy and lightweight.
4. Sealing treatment to eliminate secondary pollution. Garbage is in a closed state during the compaction and loading and transportation processes. The garbage bin and filler interface are equipped with special rubber sealing strips, compressed and sealed with locking devices; a unique drain valve is installed on the sewage tank, reliable sealing, not easily clogged. The filler cover is fully covered over the filler inlet, eliminating the phenomenon of garbage dust flying caused by the disturbance of the airflow at the rear of the vehicle during the transfer process, making the appearance more aesthetically pleasing.
5. Hydraulic lifting safety loop. In the hydraulic system for lifting the filler, a bidirectional balancing valve is installed. This valve not only ensures the smooth descent of the filler but also isolates the direct connection between the lifting cylinder and the hydraulic hose. Even if the hose bursts, the filler will not suddenly drop, improving the safety of use.
Advanced electronic control system. Using a CAN bus vehicle controller for control, the control circuit is generated within the controller, using logic loops to ensure the sequential execution of each operation instruction, while ensuring mutual interlocking between operation instructions, only external wiring connections, reducing the rate of failures, avoiding accidents caused by misoperation, improving reliability; a specially set emergency stop button can stop the garbage compaction mechanism in any state or any position, ensuring the safety of operators and equipment.
7. The filler and bin combination use a locking mechanism, and the sliding plate uses nylon slide block guidance. The filler and bin combination part has a reasonable structure and uses a fully sealed locking technology. The sliding plate track is made of high-strength manganese steel material by integral stamping, and the sliding plate movement uses nylon slide block guidance.
8. Automatic and manual operation systems. Each mechanism has both automatic and manual operation modes. If an automatic operation failure occurs, manual operation can complete the mechanism operation and discharge of garbage, ensuring high-efficiency work of the garbage truck and providing great convenience for debugging, maintenance, and failure handling.
9. Convenient operation control. The operation control box is installed separately in the driver's cab and at the rear of the vehicle. The operation control box in the driver's cab can control the push-off discharge and select the operation mode (such as automatic or manual), while the operation control box at the rear of the vehicle controls the operation of the compaction mechanism and the barrel turning mechanism, making operation very convenient. Especially in the landfill, the operator does not need to get out of the vehicle to complete the discharge and sewage discharge.

factory show

success case show

customer vist