The ladder truck is also called a ladder transporter, aerial transporter, aerial work vehicle, and ladder moving truck. The truck is mainly used for project leasing, curtain wall construction, rooftop waterproofing, solar installation, advertising guns, power maintenance, air conditioning installation, moving companies, cement sand and stone transportation, ship maintenance, road and bridge repair, etc.
The operating range can reach 36 meters high, equivalent to 12 floors, and the maximum load-bearing cargo weight is 400 kilograms.
Hydraulic system (imported parts from Germany): provide a complete set of hydraulic systems, balance valve group and multi-way valve
Hydraulic motor (imported parts): drive the winch Brake (imported parts): lock the winch
Hydraulic legs (exported parts from Future Fast): exported to the United States and Japan, each cylinder has an independent steel stamp and is an important part of the vehicle
Hydraulic lock (imported parts): lock the hydraulic oil (to prevent pressure release)
Reducer (imported parts): reducer pressure motor, assist in stopping the rotating level
| Main technical parameters of aerial ladder vehicle |
| Item |
Project |
Unit |
Data |
dimension |
Overall length |
mm |
5995 |
| Overall width |
mm |
1900 |
| Overall height |
mm |
2850 |
Mass |
Seated person(driver included) |
/ |
5 |
| Total mass |
kg |
4495 |
| Curb mass |
kg |
4170 |
Main performance parameters |
Rated loading capacity of working platform |
kg |
400 |
| Max working height |
m |
30/32 |
| Outrigger span |
mm |
1000 |
| Outrigger retraction time |
s |
20 |
Driving parameters |
Axle nos. |
/ |
2 |
| Axle load |
/ |
1835/ 2660 |
| Wheelbase |
mm |
3360 |
| Front tread |
mm |
1385 |
| Rear tread |
mm |
1425 |
| Springs nos. |
/ |
7/4+5 |
| Tires nos. |
/ |
6 |
| |
Tire specification |
|
7.00R16LT |
| Max driving speed |
km/h |
100 |
| Approach angle |
° |
28 |
| Departure angle |
° |
18 |
Configuration Instructions
| Part name |
Brief Description |
| Truck chassis |
JMC |
| Engine |
Diesel engine, maximum power 85KW, exhaust, turbocharged |
| Driver |
Double-cab, 5 person seated, |
| Base plate |
Anti-slip base plate |
| PTO system |
Hydraulic operation |
| Working platform |
1100×1000×450(mm) |
| Boom type |
Seven sections synchronous extension |
| Boom lifting form |
Double luffing cylinders make arm lifting, lowering and rotation more stable |
| Rotating device |
90 degrees left and right |
| Legs |
Two-section H-type telescopic outriggers, individually adjustable, automatic hydraulic |
| Operation |
Working platform and ground remote control electrical operation, turntable hydraulic operation |
| Radiator |
Manual, automatic cooling when the temperature reaches 35 degrees |
Technical advantages:
1. Double variable-luffing oil cylinder, arm lifting and lowering, rotation is more stable
2. Electronically controlled power take-off, power take-off handbrake cannot be operated at the same time (alarm prompt)
3. Widened ladder arm width 1020mm, trolley up and down work is more stable and safe
4. Horizontal double-row cloud ladder winch, wire rope diameter 10mm, ladder arm lifting is more stable.
5. The power take-off is directly connected to the double pump, with large displacement, faster movement speed of each component, higher pressure, and greater output torque.
6. Six outriggers, 2 in front and 4 in the back (2 auxiliary outriggers), the whole vehicle support is more stable, protecting the frame and chassis. The two-stage outriggers are linked by wire ropes, with a super-large span, 5 meters in front and back span, and 6 meters in lateral span.
7. Equipped with two tool boxes, and built-in air pumps can be connected to external pneumatic tools.
8. The electrical system has higher precision and stability, and the operating handle adopts a linear push rod, stepless speed change, and stronger controllability. The cargo box control and the cloud ladder control are integrated into one operating handle.
9. A touch screen is installed to visualize the various parameters. There are buttons under the screen to adjust the parameters at any time according to the working conditions.
10. The rotating platform has a built-in hydraulic rotating joint to prevent the hydraulic pipe from rotating, squeezing and bursting.
11. The extra-long auxiliary ladder is 5 meters long, which is more stable for up and down transportation during work and has a larger working angle range.
12.The frame auxiliary beam adopts a heightened and thickened longitudinal beam. The overall tonnage of the frame reaches 2 tons. The material is solid, the strength is extremely high and the firmness is better. The upper and lower parts are fixed with 6 U-bolts and 5 high-strength U-shaped connecting plates, and the upper and lower parts are connected very firmly.
13.The iron parts of the whole vehicle are made of high-strength plates, which are twice as strong as ordinary steel plates and are not easy to deform and crack.
14. The ultra-large 7-inch touch screen is used as a new computer input device. It is currently the simplest, most convenient and natural human-computer interaction method, making the operator's control more intuitive, real-time reading of various parameters of the control load and detailed alarm content, and convenient and fast setting of various parameters of the equipment debugging to maximize the performance of the equipment in the shortest time. The touch screen is intelligently in standby when there is no operation, which greatly improves the service life of the touch screen.
15. The intelligent real-time monitoring system allows users to view the status of each component of the control system in real time, so as to conveniently and quickly troubleshoot faults.
Audited Supplier 
){kind=link}