Medical cabin cabinet/interior configuration
Middle partition assembly
Install a set of middle partition made of new environmentally friendly materials between the cab and the medical cabin. There is a glass observation window on the middle partition to facilitate observation and communication between the front and rear cabins.
Cabinet assembly
Install a set of long strip equipment cabinet made of new environmentally friendly materials. The cabinet body is provided with storage spaces such as drawers and empty cabinets.
Install a set of oxygen cylinder cabinet made of new environmentally friendly materials. The cabinet can hold two 10L oxygen cylinders. Install a set of wall cabinet made of new environmentally friendly materials. The wall cabinet adopts sliding door structure for convenient opening of the cabinet door. Install a set of long strip seat cabinet, including cushion, backrest and two-point seat belt.
Medical cabin interior
Medical cabin interior: made of new lightweight materials, waterproof, mildew-proof, antibacterial and easy to clean.
Medical cabin floor: made of medical floor leather material, anti-slip, waterproof, mildew-proof, antibacterial and easy to clean.
Auxiliary equipment
Sliding door push-pull window: flat push-pull glass window.
Intercom: Install a hands-free microphone in the driving cabin and the medical cabin respectively to facilitate communication and exchange between personnel in the front and rear cabins.
Fire extinguisher: Equip the medical cabin with a set of 1kg dry powder fire extinguisher.
Dirt bucket: Equip the medical cabin with a covered foot-operated dirt bucket.
Safety handrail: Install a long strip handrail on the top of the medical cabin.
Emergency hammer: Install an emergency hammer in the medical cabin.
Optional configuration
Negative pressure purification device: 1 set. When the negative pressure device is started, the relative pressure in the cabin is -30Pa to -10Pa.
Driving assistance system: driving recorder
Spade stretcher: 1 pair (optional for stretcher compartment)
Stair stretcher: 1 pair, load-bearing: 160kg
Side door pedal: Assist getting on the vehicle through the side sliding door
Tailgate pedal: Assist getting on the vehicle through the tailgate.
Medical warning appearance
Medical compartment rescue facilities
Rescue system
Automatic loading stretcher: The stretcher is made of high-strength aluminum alloy, with a PVC waterproof sponge mattress and an adjustable backrest; thickened oval leg tubes, evenly distributed auxiliary loading wheels around and aluminum blocks greatly increase the bearing capacity of the derrick. The loading process can be easily completed by only one person.
Stretcher platform: Made of high-quality aluminum alloy material to assist in loading and unloading the stretcher.
Infusion stand: Install a set of aluminum alloy guide rail infusion stand on the top of the medical compartment, including 2 folding hooks.
Medical oxygen control system
Two 10L steel oxygen cylinders with a nominal pressure of 15MPA (light weight, easy to load, unload and replace). At the same time, it is equipped with two single-meter pressure reducing valves, two German-style oxygen terminals, one ventilator interface and one wall-mounted oxygen inhaler. When patients inhale oxygen, the oxygen output can be controlled, and a humidifying bottle is provided to provide moist oxygen for patients, which is more conducive to patients' oxygen inhalation.
Medical electrical system
Four 12V interior lights, stable light source, large illumination area, and 2 infusion spotlights.
Inverter
Vehicle-mounted sine wave 1000W, with stable frequency, stable voltage and stable output power, providing power supply for on-board equipment; 2 sets of 220V/12V multi-functional sockets (can be connected to two/three holes, AC/DC dual-purpose).
Disinfection lamp: 1 intelligent timing ultraviolet disinfection lamp to ensure the hygienic and safe environment in the compartment.
Air circulation system
Air conditioning/heating: 1 set of rear air conditioning and rear heating device, independent control of heating and cooling, and reasonably regulate the temperature in the compartment according to need.
Ventilation fan: Install a set of DC12V multi-functional ventilation fan with air intake and exhaust on the roof, which can effectively ensure efficient air circulation in the medical compartment.
Body structure
Adopt steel reinforced frame structure design, safe and reliable.
The right side of the vehicle body is equipped with a sliding door, and the rear end adopts a double-opening tailgate structure with a large opening width, which is convenient for medical staff and patients and stretchers to get on and off.
Vehicle appearance
The whole body is white. Red cross emblems are pasted on the front of the vehicle, both sides of the vehicle body and the rear door. Body color strips are pasted around. The colors are bright and eye-catching, providing effective warning.
The medical compartment glass is pasted with 2/3 frosted glass paper to effectively protect patient privacy.
Warning lights
Streamlined integrated LED warning light assembly (injection molded of polymer materials), the alarm horn has a power of 100W, and a wire-controlled controller with LED light groups inside. Blue flashing lights are installed on both sides and at the rear to provide effective warning.
){kind=link}